Pool care articles
Utility Chloramines and Pool Test Results
A chloramine figure in an Austin drinking-water report is not a measurement of your pool. EPA explains that water suppliers can use chloramines for drinking-water disinfection. Keep that utility context separate from a pool test and from assumptions about swimmer contamination, odors or equipment performance after a top-off.
Identify what the report measured
Austin Water's second-quarter 2026 report lists total chloramines in its treatment-plant tap columns. Its first section presents averages for samples collected April 1 through June 30. These entries describe the reported drinking-water samples. They do not show a test taken from your pool after water was added.
EPA explains that drinking-water chloramines are disinfectants most commonly formed by adding ammonia to chlorine. That utility treatment context matters when reading the word chloramines. Seeing the term in a city report does not, by itself, demonstrate contamination caused by swimmers in a residential pool.
Do not turn a source-water number into a pool diagnosis
The city's plant results cannot establish the pool's current free or combined chlorine reading. Nor do they identify the cause of an odor, demonstrate that a saltwater generator is working, or prove that water is suitable for swimming. Those are separate questions requiring evidence from the pool and its equipment.
A report also does not justify attributing every change noticed after a top-off to the incoming water. Preserve the timing of the observation without promoting that sequence into a confirmed cause. A service professional can compare the history with actual measurements and inspect equipment where appropriate.
Prepare a useful service question
Keep the utility report link and reporting period with your notes. Separately record when the top-off occurred, what prompted it, the pool test date and the exact result labels. If a controller displayed a message, record its wording and equipment model rather than translating it into a diagnosis.
This separation gives a technician clearer evidence: historical utility information, current pool measurements and equipment observations each retain their own context. If the test is uncertain or conditions raise a safety concern, keep the pool out of use while the uncertainty is resolved. Do not choose a chemical dose from the utility table or assume an old plant average describes today's pool.
Sources
In Austin
Fill water matters here. Austin Water reported finished water leaving its three plants in the second quarter of 2026 at pH 9.65 to 9.74, total hardness of 76 to 77 mg/L as CaCO3, total alkalinity of 51 to 60 mg/L, and 2.52 to 2.69 mg/L of chloramines. Those are averages for tap water, not readings of your pool, so test the pool itself after a top-up.
Related articles
- Why chlorine falls on busy swim days
- A flow shutoff for your chlorine feeder
- Leaves, testing and your pool water
Sullivan’s Pool Service maintains pools in and around Austin, including Northwest Hills, South Austin, West Lake Hills, Tarrytown, Great Hills, River Place, Crestview, East Austin, North Austin, West Campus, Hyde Park, Downtown Austin and St. Johns, and in Bee Cave, Cedar Park, Georgetown, Leander, Pflugerville and Round Rock. See every service area.
Weekly residential service has one fixed monthly price, set by pool size: see pool service pricing for what each size tier covers.
Tell us about your pool
Tell us your service location and whether you need weekly care, help with equipment, or a one-time service. Call or send the quote form. We’ll confirm availability and the next step for your pool. Repairs and other separately quoted work are discussed before approval.