Pool care articles

Why chlorine falls on busy swim days

This guide from Sullivan's Pool Service summarizes the cited guidance. On busy swim days, chlorine can fall because swimmers bring body waste into the water, and when chlorine binds to that waste it forms chloramines, a type of combined chlorine. Many things can reduce chlorine concentration, so the level in pool and hot tub water must be routinely tested, and more often when a number of people are using the pool.

What chlorine does in your water

Chlorine is added to pool water to kill germs. It is effective at this job, but it does not act the moment it hits the water. Disinfection takes some time, and that delay matters on days when people are constantly swimming.

When the chemical is used properly, it can kill most germs within a few minutes. That window is short enough to keep a pool safe under ordinary conditions, but it still means contaminants need time to be dealt with rather than being wiped out on contact.

Speed also depends on conditions. When the chlorine level and the pH of the water are kept where the CDC recommends, chlorine can kill most bacteria in less than a minute. That includes E. coli 0157:H7, a bacterium sometimes found in water contaminated by swimmers. Keeping those two measurements in range is what allows the disinfectant to work that quickly.

What swimmers' bodies add

Every swimmer arrives with traces of whatever the day has left on their skin. Sweat, skin oils, sunscreen, and other body waste all come off in the water, and each of these things can lower the chlorine concentration that keeps the pool safe. That is why the level needs routine testing, especially on days when the pool gets heavy use.

When chlorine meets the waste swimmers bring in, it binds to it instead of staying free to kill germs. This binding creates chemicals known as chloramines.

Chloramines are a form of combined chlorine. They form in the water first, and then some of them leave the water and enter the air just above the surface. This is the smell many people notice at indoor pools, and it is a sign the water has been working hard against a heavy swim load. A busy swim day uses up more of the chlorine doing its job.

Why combined chlorine does not kill germs

Free chlorine at the right level, held together with balanced pH, is what actually does the work of killing germs in a pool. Combined chlorine, the stuff that forms when chlorine binds to what swimmers bring into the water, does not do that job. It is a spent form of the chemical, and it lingers in the water instead of protecting anyone in it.

That said, even water kept in good shape cannot wipe out every germ right away. A few can hold on for a long time, which is why swimmers themselves play a role in staying healthy by following the basic steps that help prevent swimming-related illnesses.

Health departments in cities, counties, and states commonly cap combined chlorine at 0.4 ppm or less. On days when the pool sees heavy use, that number can creep up, and watching for it is part of keeping the water safe.

How chloramines build up

Chloramines form in pool water when chlorine binds with the waste swimmers leave behind, and on days with heavy use they can accumulate faster than they break down. That buildup matters for two reasons, one in the water and one in the air.

When chloramines turn into gas, they lift out of the water and sit in the air just above the surface. This is especially noticeable indoors, where the space around the pool holds whatever rises off the surface. Breathing that air can irritate the nose and the rest of the respiratory tract, and chloramines in the water can also bother skin and eyes.

The chemistry starts with what swimmers carry in on their bodies, so a brief rinse in the shower before getting in takes away much of the material that would otherwise help form chloramines in the first place.

Testing on days with many swimmers

On days when a lot of people are in the pool, testing deserves extra attention. A standard routine of checking chlorine and pH at least twice per day is a reasonable baseline, but heavy swimming draws the levels down faster, so more frequent checks make sense when the pool or hot tub is seeing steady use.

The test kit itself matters. DPD kits, which use a reagent called N,N Diethyl-1,4 Phenylenediamine Sulfate, give the most accurate readings for both chlorine and pH, so they are worth choosing over less precise methods.

Chlorine should be read in two ways. Total chlorine is the combined amount of everything in the water, while free chlorine is the portion still able to do its job. Watching both numbers on a crowded swim day shows how much of the supply has been used up and whether the water needs adjusting.

Next step: water testing and chemistry service.

Sources

In Austin

Fill water matters here. Austin Water reported finished water leaving its three plants in the second quarter of 2026 at pH 9.65 to 9.74, total hardness of 76 to 77 mg/L as CaCO3, total alkalinity of 51 to 60 mg/L, and 2.52 to 2.69 mg/L of chloramines. Those are averages for tap water, not readings of your pool, so test the pool itself after a top-up.

Source: Austin Water, Water Quality Summary, 2nd Quarter 2026 (samples April 1 to June 30, 2026), finished water at the Davis, Ullrich and Handcox plant taps.

Related articles

Sullivan’s Pool Service maintains pools in and around Austin, including Northwest Hills, South Austin, West Lake Hills, Tarrytown, Great Hills, River Place, Crestview, East Austin, North Austin, West Campus, Hyde Park, Downtown Austin and St. Johns, and in Bee Cave, Cedar Park, Georgetown, Leander, Pflugerville and Round Rock. See every service area.

Weekly residential service has one fixed monthly price, set by pool size: see pool service pricing for what each size tier covers.

Tell us about your pool

Tell us your service location and whether you need weekly care, help with equipment, or a one-time service. Call or send the quote form. We’ll confirm availability and the next step for your pool. Repairs and other separately quoted work are discussed before approval.